Overview and Features 
 ● The equipment for manufacturing pellets by an extrusion spheronizer includes an extrusion spheronizer, an extruder, and a centrifugal spheronizer. 
 ● An extruder is a device for forming a soft material (obtained from a wet mixing granulator or other processes) into a long cylindrical extrudate. 
 ● The diameter of the pellets is determined by the extrusion orifice plate, which is easy to control. The wide granulation range of the centrifugal spheronizer is to make the round material extruded from the extruder uniformly cut into small cylindrical particles with the same diameter and roll into pellets. device of. The extruded round bar is cut on a rolling disc to a length approximately equal to the diameter of the cylinder, and then rolled into a spherical pellet by a rolling disc rotating at high speed. The unique tooth plate designed by our company has the function of polishing the balls. Rolling discs have many special broken teeth, which are densely distributed. These broken teeth are usually 1-2mm high and 2-4mm apart. 
 ● Among the various pelleting methods, pellets produced by the extrusion spheronization method have become a very popular method in the world.
 
 Features: 
 ● Large production capacity and low equipment cost
 ● Can produce 0.5 ~ 3mm pellets, the diameter of the pellets is similar, and the dispersion band is small
 ● Even content in pellet after granulation
 ● The shape of the particles can be spherical, cylindrical and irregular; spherical is the best and easy to coat
 ● Pills can be made under the most suitable conditions for the materials according to the properties of different materials